For a precision surface grinder, first of all, his processing environment needs to be high, the processing environment conditions are met, and the protection work can be done more thoroughly and more usefully! Precision surface grinder conditions allow the best work in the air conditioning thermostat workshop, this is conducive to the stability of the mold processing, the workpiece is not deformed; second, the air conditioning workshop clean, easy to clean. The following focuses on the protection and protection of precision surface grinders:
In order to ensure grinding accuracy, it is necessary to maintain punctuality and routine protection.

1) The daily operation is completed. Each part of the grinder is a sliding part. It should be cleaned and oiled.
2) Use clean cloth or a small brush to clean the abrasive swarf from various parts.
3) The necessary parts should be marked with anti-rust oil, such as spindle grinding head, wheel flange, dial and other parts.
4) The use of air blow guns to clean the tabletop articles and grinders is prohibited because the blow guns should blow the iron filings into the grinding bed track to form rail guides to damage and affect the accuracy and feel.
5) Please pay attention to whether or not the transmission cable is loose and make adjustments. Replace the cable should pay attention to the rope around the tightness and tightness, because it directly affects the service life of the cable.
6) Please pay attention to whether the oil mirror on the grinder is oily, and ensure that the oil path is smooth.
For more information, you can refer to the introduction of professional grinding machine manufacturers, each type of grinding machine will be equipped with a special protection and elucidation. Linqing Grinding Machine Factory.

Grinding machine warranty operations planning 1, workers, folders, measuring tools, bed and parts cleaning, cleaning iron and environmental sanitation; 2, check the oil level, not below the oil standard, add the various parts of the lubricant. Grinding weekend protection plan

First, cleaning 1, eradicate wear debris, especially dead ends wear debris; 2, wipe machine tools, fuel tanks, cooling boxes on the surface and other dead parts.

Second, lubrication 1, check the spindle box and hydraulic tank oil surface, add enough oil; 2, check the oil path is not clear, cleaning oil path defects.

Third, twist 1, check and tighten the tubing, cylinders and other loose connector screws; 2, check the hand wheel, tighten the loose screws.

IV. Adjustment 1. Check and adjust the elasticity of the belt; 2. Check and tighten the wheel fixing screws; 3. Check and adjust the oil pressure. V. Anti-corrosion 1. Remove rust from various parts, protect the paint surface, and do not touch it; 2. Disable, replace rails, slide surfaces, handwheels, and other parts that are exposed to rust. Outside the park grinding machine maintenance operations planning 1, washing the bed surface and cross the tank, tanks, pumps, oil holes, oil lines, felt pads, check the cooling pump; 2, wash and check the adjustment of the operation handle, cleaning and adjusting the thimble; 3 , check the tubing of each department, correct oil pressure; 4, check the grinding head, adjust the tightness of the belt; 5, tighten the screws of each department; 6, add the oil of each department; 7, clean the motor, adjust the elasticity of the belt; 8, the various parts of the machine table Clean and wash accessories.

Cylindrical Grinding Machine Two Guarantee Operation Planning 1. Wheel Headstock Cleaning, Oil Change and Spindle Emptying Adjustment; 2. Cleaning Motorized Feeding Arrangement and Workbench Vertical Manual Arrangement to Check Lubrication Condition; 3. Repair Workbench Guide and Grinding Wheel Guide Glitches; 4. Cleaning of oil cylinders, filter oil tubes, and adjustment of motors and electrical equipment.

Internal grinding machine maintenance work planning 1, cleaning work station, water tank, water pump, oil filter and hydraulic oil passages, and check the coolant; 2, cleaning wheel modifier, cleaning and inspection of the operation handle; 3, cleaning card Plate, grinding head, check and adjust the distance between the grinding head and the motor; 4, check the speed of the stroke, adjust the amount of oil in the guide rail; 5, tighten the screws of the various parts; 6, the various parts of the machine table cleaning and cleaning accessories, add the various parts of the lubricant. Inner Park Grinder Two Guarantee Operation Plan 1. Check the oil pool lubricants and make up for expired liquid levels; 2. Check the leakage of hydraulic joints and hydraulic cylinders and correct the working pressure;